Bypass a MAC address on your MikroTik hotspot (IP Binding) from the mobile app

Updated on · MonMikroTik team

Some devices need Internet access without going through the hotspot login page: your own phone, a security camera, a printer, a payment terminal, a Smart TV… On MikroTik, this is done with a bypassed IP Binding on the device's MAC address. With the MonMikroTik app, you do it in a few seconds from your phone, even remotely.

The three types of IP Binding

TypeIn the appEffect
bypassedContournéThe device accesses the Internet without a ticket and without a login page.
blockedBloquéThe device is blocked: it can neither connect to the hotspot nor browse.
regularStandardNormal hotspot behavior. Mainly used to fix an IP address or to redirect (to-address field).
A bypassed device uses no ticket and does not appear among active users: keep it for your own equipment, otherwise it is free WiFi.

Step 1: find the device's MAC address

A MAC address looks like AA:BB:CC:DD:EE:FF. Where to find it:

  • Android: Settings > Wi-Fi > tap your hotspot network > MAC address (or Settings > About phone > Status);
  • iPhone: Settings > Wi-Fi > tap (i) next to the network > Wi-Fi Address;
  • Camera, printer, TV: on the device label or in its network menu;
  • From the router: connect the device to the WiFi, then check the hotspot host list in Mikhmon Online (Hotspot > Hosts menu) or in Winbox (IP > Hotspot > Hosts).
Watch out for random MAC addresses. Android (“Randomized MAC”) and iPhone (“Private Wi-Fi Address”) can present a different address on each network, or even change it over time. For a phone you want to bypass permanently, turn this option off for your hotspot network: on Android, choose “Use device MAC”; on iPhone, turn off “Private Wi-Fi Address”. Note the address after this change.

Step 2: add the IP Binding from the app

  1. Open the MonMikroTik app and go to the Mikhmon tab.
  2. Tap your router.
  3. At the top right, tap Dashboard. The button is only active if the router is online.
  4. In the router dashboard, tap IP Binding. The list of existing bindings is displayed.
  5. Tap Ajouter un IP binding (Add an IP binding).
  6. Fill in the form:
    FieldWhat to enter
    Adresse MAC (MAC address)The device address, in the format AA:BB:CC:DD:EE:FF.
    Adresse IP (IP address)Leave empty for a bypass by MAC address. A MAC or an IP is required.
    Rediriger vers (Redirect to, optional)Leave empty for a simple bypass.
    Serveur (Server)all for all hotspot servers, or the server concerned.
    TypeContourné (bypassed).
    Commentaire (Comment, optional)A name to find your way: “Manager phone”, “Entrance camera”…
  7. Tap Enregistrer (Save). The message Binding créé (Binding created) confirms that the rule is active on the router.

The device now has Internet access without a ticket. If it was already connected, turn its WiFi off and on again so the rule applies immediately.

Edit, search or delete a binding

  • Search: use the Rechercher une adresse MAC (Search a MAC address) field at the top of the list.
  • Edit: tap a binding to open its form, change for example the type (Contourné, Bloqué, Standard), then Enregistrer (Save).
  • Delete: tap the trash icon to the right of the binding, then confirm. The device goes back through the hotspot login page.

Each binding in the list shows a badge: Contourné (bypassed), Bloqué (blocked) or Standard (regular).

Block an unwanted device

The same procedure lets you block a device (an abusive customer, an unknown device): choose the Bloqué (blocked) type. To unblock it, delete the binding or set it back to Standard.

Command-line equivalent

For reference, the app creates the equivalent of this command on the router:

/ip hotspot ip-binding add mac-address=AA:BB:CC:DD:EE:FF type=bypassed server=all comment="Manager phone"

Common problems

ProblemSolution
The Dashboard button is grayed outThe router is offline for the platform. Check the VPN and that the API service is enabled (IP > Services > api).
“Routeur hors ligne ou inaccessible” (Router offline or unreachable)Same cause: the platform cannot reach the router. Try again when it is online.
The device still sees the login pageThe MAC address is wrong or random (see step 1), or the binding is on another hotspot server: choose all. Turn the device's WiFi off and on again.
MAC address format errorUse 6 pairs of characters separated by colons: AA:BB:CC:DD:EE:FF.
The bypass disappeared after a router resetIP bindings are included in the export: see Reconfigure a router without losing your users.

Manage your MikroTik hotspot from the cloud

Mikhmon Online, ticket sales via Orange Money and Moov Money, resellers and VPN. Free sign-up.